Conferences

본문 바로가기


Conferences

Conferences

Conferences

 

2022 


122. 2022.04.28, "Effect of dopant distribution on the thermoelectric properties of B-doped Silicon"

      Maryam Allahyari, 대한금속재료학회, 창원컨벤션센터, 창원

 

121. 2022.04.28, "Understanding Dopant Effect on Microstructures and Thermoelectric Properties of Si-Ge Alloys"

      Kyuseon Jang, 대한금속재료학회, 창원컨벤션센터, 창원

 

120. 2022.04.28, "Enhancing Thermoelectric Properties of NbCoSn Based half-Heusler via Doping and Alloying"

      Hail Park, 대한금속재료학회, 창원컨벤션센터, 창원

 

119. 2022.04.28, "Improving of Thermoelectric Performance of Grain Refined Nb1-xTaxCoSn Half-Heusler via Amorphous Precursor"

      DongHyeon Chae, 대한금속재료학회, 창원컨벤션센터, 창원

 

118. 2022.04.27, "Cracking mechanism and creep properties of Co-Al-W superalloys manufactured by directed energy deposition"

      Boryung Yoo, 대한금속재료학회, 창원컨벤션센터, 창원

 

117. 2022.04.27, "Microstructure and thermoelectric properties of additively manufactured TiNiSn half-Heusler alloy"

      Seoung-Ho Lim, 대한금속재료학회, 창원컨벤션센터, 창원

 

116. 2022.04.27, "The Influence of Long Period Stacking Ordered (LPSO) Phase on the Mechanical Properties in the Mg-Gd-Zr-Zn Alloy"

      Sangwon Lee, 대한금속재료학회, 창원컨벤션센터, 창원

 

115. 2022.04.27, "The influence of Ru addition on the promotion of TCP phase in the Ni-based superalloy: APT and TEM approaches"

      Sangwon Lee, 대한금속재료학회, 창원컨벤션센터, 창원

 

114. 2022.04.27, "Hf 첨가를 통한 Ni 초합금의 적층 제조 발생하는 고온 균열 방지 기구 규명"

      KenHee Ryou, 대한금속재료학회, 창원컨벤션센터, 창원


113. 2022.03.01, "The influence fo Ru addition on the precipitation behavior of topologically close-packed phase in the Ni-based superalloy"

      Sangwon Lee, 2022 International Conference of The Minerals, Metals & Materials Society, Anaheim, USA 


112. 2022.03.01, "Mechanism of oxygen-induced hot cracking of IN738 during additive manufacturing"

      KenHee Ryou, 2022 International Conference of The Minerals, Metals & Materials Society, Anaheim, USA 


111. 2022.02.28, "Three-dimenstional atomic mapping of ligands on nanoparticles by atom probe tomography"

      Kyuseon Jang, 2022 International Conference of The Minerals, Metals & Materials Society, Anaheim, USA 


2021


110. 2021.10.22, "Design a New High-performing Co-Ti Based Superalloy with Light Elements"
      Taehyeok Kang, 대한금속재료학회, Virtual conference   


109. 2021.10.22, "Promotion of Topologically Close-packed (TCP) Phase Formation by Ru Addition in Ni-based Superalloy"
      Sangwon Lee, 대한금속재료학회, Virtual conference   


108. 2021.10.20, "Ball Milling Induced Crystallization of Amorphous NbCo1.1Sn"
      Hail Park, 대한금속재료학회, Virtual conference    


107. 2021.10.20, "Relief of anisotropic elongation of Ti64 by directed energy deposition process via laminated structure"
      Yejun Park, 대한금속재료학회, Virtual conference   


106. 2021.10.20, "Microsturucture and Phase of the Additively Manufactured TiNiSn Half-Heusler Thermoelectric Alloy"
      Seoung-Ho Lim, 대한금속재료학회, Virtual conference   


105. 2021.10.20, "Local magnification effect induced W concentration artifact in APT analysis of Ni-based superalloy"
      Hosun Jun, 대한금속재료학회, Virtual conference   


104. 2021.10.20, "On the oxide-induced hot-cracking mechanism of Ni-based superalloy during additive manufacturing"
      KenHee Ryou, 대한금속재료학회, Virtual conference    


103. 2021.04.29, "Directed energy deposition of Co-Al-W superalloys"
      Boryung Yoo, 대한금속재료학회, Virtual conference   


102. 2021.04.29, "The influence of Ru addition on the precipitation behavior of topologically close-packed phase in the Ni-based superalloy"
      Sangwon Lee, 대한금속재료학회, Virtual conference   


101. 2021.04.29, "Hot cracking growth of the thin-wall type additively manufactured AISI D2 steel"
      Seoung-Ho Lim, 대한금속재료학회, Virtual conference   


100. 2021.04.29, "Three-dimensional atomic mapping of ligands on nanoparticles using Atom Probe Tomgraphy"
      Kyuseon Jang, 대한금속재료학회, Virtual conference   


99. 2021.04.29, "Mechanism of hot-cracking induced by oxide of Ni-based superalloy during additive manufacturing"
      KenHee Ryou, 대한금속재료학회, Virtual conference   


98. 2021.04.28, "A comparison of liquation crack sensibility on Co-Al-W-B superalloy: γ' free zone effect"

      Vioni Dwi Sartika, 대한금속재료학회, Virtual conference   


2020 


97. 2020.11.30, "IN738 니켈 기반 초내열합금의 적층 제조시 고온 균열 거동 해명"
      KenHee Ryou한국추진공학회부산     


96. 2020.11.27, "높은 강도를 가지는 Al-Ni-Ta 반응성 구조 재료 개발"
      Boryung Yoo, 한국추진공학회부산   


95. 2020.11.20, "Correlative characterization of functional high entropy materials"
     Chanwon Jung, 한국재료학회, 제주 


94. 2020.11.19, "Hot cracking mechanism of additively manufactured Ni based superalloy"
      KenHee Ryou, 한국재료학회, 제주   


93. 2020.11.19, "높은 강도와 밀도를 갖는 Al기반 반응성 구조재료 개발"
      Boryung Yoo, 한국재료학회, 제주    


92. 2020.11.19, "Revealing the atomic distribution in CIGS & CZTS absorber films with Atom Probe Tomography"
      Pyuck-pa Choi, Atom Probe Tomography and Microscopy 2020Virtual conference    


91. 2020.11.9, "Elemental partitioning & site-occupancy in γ/γ'-strengthened Co-Ti-base alloys"
      Pyuck-pa Choi, PVSEC-30 & GPVC 2020Jeju, Republic of Korea      


90. 2020.11.4, "Effects of Alloying Elements on Microstructures of Co-Based Superalloys by Atom Probe Tomography"
      Hye-ji Im, The 6th International Conference on ENGE, Jeju, Republic of Korea  


89. 2020.11.4, "Investigation of Nanosized Heusler Precipitates by Correlative APT and TEM Analyses"
      Chanwon Jung, The 6th International Conference on ENGE, Jeju, Republic of Korea  


88. 2020.11.4, "Three-Dimensional Atomic Mapping of Ligands on Nanoparticles"
      Kyuseon Jang, The 6th International Conference on ENGE, Jeju, Republic of Korea  


87. 2020.11.4, "A study on Partial Crystallization Phenomena of Amorphous NbCo1.1Sn Half-Heusler Alloy during the Ball Milling Process"
      Hail Park, The 6th International Conference on ENGE, Jeju, Republic of Korea  


86. 2020.11.4, "Investigation of Yttria Stabilized Zirconia Nanoparticles in Additively Manufactured Ti-Based Composites"
      Gwanghyo Choi, The 6th International Conference on ENGE, Jeju, Republic of Korea 

 

85. 2020.11.4, "Analysis on 3-Dimensional Distribution of Minor Element in Ternary Metal Nanoparticles Using Atom Probe Tomography"
      Chanwon Jung, The 6th International Conference on ENGE, Jeju, Republic of Korea  


84. 2020.10.30, "Effect of nano-yttria stabilized zirconia on refined α microstructure and mechanical properties of Ti-6Al-4V manufacture using direct energy deposition"
      Gwanghyo Choi, 대한금속재료학회, Virtual conference  


83. 2020.10.28, "Effect and mechanical behavior of boron in Co-Ti based superalloys"
      Taehyeok Kang, 대한금속재료학회, Virtual conference  


82. 2020.10.28, "Effect of intrinsic heat treatment on morphology of colony in Ti-Fe alloy"
      Yejun Park, 대한금속재료학회, Virtual conference  


81. 2020.10.28, "Effect of Local Thermal Cycle and Element Segregation on Hot Cracking Behavior of Thin-wall Type Deposited  AISI D2 Steel by DLD Type Additive manufacturing"
      Seoung-ho Lim, 대한금속재료학회, Virtual conference  


80. 2020.10.28, "Nanostructure Control of Half-Heusler Thermoelectrics Through a Non-equilibrium Process"
      Chanwon Jung, 대한금속재료학회, Virtual conference  


79. 2020.10.28, "The study of CoNiCrAlY coating deposition on Co-Al-W-B superalloy by laser cladding"
      Vioni Dwi Sartika, 대한금속재료학회, Virtual conference  


78. 2020.10.28, "Hot cracking behavior induced by oxide of IN738 alloy during additive manufacturing"
      KenHee Ryou, 대한금속재료학회, Virtual conference  


77. 2020.07.17, "Al 기반 반응성 재료의 밀링 시간에 따른 미세구조의 영향"

      Hail Park, 한국추진공학회, Virtual conference 


76. 2020.07.17, "높은 강도와 밀도를 갖는 Al 기반 반응성 구조재료 개발"

      Boryung Yoo, 한국추진공학회, Virtual conference 


75. 2020.07.17, "Hot cracking Behavior of IN738 Alloy During DLD Type Additive Manufacturing"

      KenHee Ryou, 한국추진공학회, Virtual conference 


74. 2020.07.17, "The effects of alloying elements on microstructures of γ/γ'-strengthened Co-Ti-based alloys"

      Hye-ji Im, 대한금속재료학회, Virtual conference 


73. 2020.07.16, "Atom probe specimen preparation from Ag nanoparticles using pulse electroplating of Ni as an embedding medium"

      Hosun Jun, 대한금속재료학회, Virtual conference 


72. 2020.07.16, "Direct Imaging of Cetrimonium Surfactant Molecules on Multiple-twinned Pd nanoparticle"
      Kyuseon Jang, 대한금속재료학회, Virtual conference 


71. 2020.07.16, "Investigation on functionally graded materials using direct laser deposition"
      KenHee Ryou, 대한금속재료학회, Virtual conference 


70. 2020.07.16, "Effects of Oxygen on the Hot cracking Behavior of IN738 Alloy During DLD Type Additive Manufacturing"
      Seoung-Ho Lim, 대한금속재료학회, Virtual conference 


69. 2020.07.16, "In-situ formation of Heusler compound for enhanced Seebeck coefficient through the non-equilibrium process"
      Chanwon Jung, 대한금속재료학회, Virtual conference 


68. 2020.07.15, "Additively Manufactured Titanium Alloys with Equiaxed Microstructure using Powder Blends"
      Gwanghyo Choi, 대한금속재료학회, Virtual conference 


67. 2020.07.15, "The Study of Co-Al-W-B Superalloy and CoNiCrAlY Coating Produced by Laser Cladding"
      Vioni Dwi Sartika, 대한금속재료학회, Virtual conference 


66. 2020.02.25, "Partitioning Behavior Based Design of BCC / B2 Dual-phase Refractory Multi-principal Element Alloys"

      Hosun Jun, 2020 International Conference of The Minerals, Metals & Materials Society, San Diego, USA   


65. 2020.02.24, "Fabrication of strengthened Co-Al-W Alloys by Direct Laser Deposition"

      Pyuck-pa Choi, 2020 International Conference of The Minerals, Metals & Materials Society, San Diego, USA  


64. 2020.02.24, "Isotropic Microstructure and Mechanical Properties of Additively Manufactured Ti-based Alloy"

      Gwanghyo Choi, 2020 International Conference of The Minerals, Metals & Materials Society, San Diego, USA 


2019


63. 2019.11.14, "Characterization of Cu(In,Ga)Se2 (CIGS) films using correlative microscopy"

      Chanwon Jung, 2019 International Conference of Asia-Pacific Forum On Renewable Energy, Jeju, Republic of Korea 


62. 2019.11.12, "APT analysis of Co-based superalloys fabricated by additive manufacturing"

      Boryung Yoo, European Atom Probe Tomography workshop, Rouen, France 


61. 2019.10.25, "The effects of alloying elements on microstructures and mechanical properties of γ/γ'-strengthened Co-Ti-based alloys "

      Hye-ji Im, 대한금속재료학회, 대구컨벤션센터, 대구 


60. 2019.10.25, "Revealing the Distribution of Cetrimonium Surfactant Molecules on Multiple-twinned Pd Nanoparticles by Atom Probe Tomography"
      Kyuseon Jang, 대한금속재료학회, 대구컨벤션센터, 대구 


59. 2019.10.24, "Effects of Process Parameter During DLD Type Additive Manufacturing on the Microstructure of IN738 Alloy"
      KenHee Ryou, 대한금속재료학회, 대구컨벤션센터, 대구 


58. 2019.10.24, "Microstructural evolution of the heat affected zone of a Co-Ti-W alloy upon laser cladding with a CoNiCrAlY coating"
      Jae-Wook Han, 대한금속재료학회, 대구컨벤션센터, 대구 


57. 2019.10.24, "Investigation of crystallization behavior for NbCoSn metallic glass using correlative microscopy"
      Chanwon Jung, 대한금속재료학회, 대구컨벤션센터, 대구 


56. 2019.10.23, "Development of Advanced High Strength Ti alloys with Isotropic and Refined Microstructure for Additive Manufacturing"
      Gwanghyo Choi, 대한금속재료학회, 대구컨벤션센터, 대구 


55. 2019.10.23, "상온 연성을 지니는 BCC / B2 구조의 내화원소 다원합금 설계"
      Hosun Jun, 대한금속재료학회, 대구컨벤션센터, 대구 


54. 2019.08.21, "Isotropic Microstructure and Mechanical Properties of Additively Manufactured Ti-based Alloy"

      Gwanghyo Choi, The 10th Pacific Rim International Conference on Advanced Materials and Processing, Xi'an, China


53. 2019.08.21, "Design of γ'-strengthened Co-Base Alloys Based on Multi-scale Characterization"

      Pyuck-pa Choi, The 10th Pacific Rim International Conference on Advanced Materials and Processing, Xi'an, China 


52. 2019.08.20, "Design of Dual-Phase Refractory High Entropy Alloy"
      Hosun Jun, The 10th Pacific Rim International Conference on Advanced Materials and Processing, Xi'an, China 

51. 2019.07.08, "Three-dimensional atomic mapping of nanoparticles using atom probe tomography" 

      Pyuck-pa Choi, 2019 International Symposium on Metastable, Amorphous and Nanostructured Materials, Chennai, India 


50. 2019.04.25, "Phase transformation behavior of NbCoSn metallic glass"
      Chanwon Jung,  대한금속재료학회, 창원컨벤션센터, 창원

49. 2019.04.25, "Revealing surfactant distribution on multiply twinned Pd nanoparticle surface"
      Kyuseon Jang,  대한금속재료학회, 창원컨벤션센터, 창원


48. 2019.04.25, "Laser cladding of CoNiCrAlY bond coat on Co-Ti-W alloy and effects of dilution"
      JaeWook Han,  대한금속재료학회, 창원컨벤션센터, 창원

47. 2019.04.25, "Effects of Cr and Al additions on the  γ/γ′ forming Co-Ti-W based alloys"
       Boryung Yoo,  대한금속재료학회, 창원컨벤션센터, 창원


46. 2019.04.24, "Design of dual-phase refractory multi-principal element alloy"
       Hosun Jun,  대한금속재료학회, 창원컨벤션센터, 창원

 

45. 2019.04.24, "Rapid Alloy Screening of Co- and Ti-based Alloy Using Direct Laser Deposition Process"
       Gwanghyo Choi,  대한금속재료학회, 창원컨벤션센터, 창원

44. 2019.04.24, "Atom probe tomography of amorphous and nanostructured materials"
       Pyuck-Pa Choi,  대한금속재료학회, 창원컨벤션센터, 창원

43. 2019.04.01, "Orientation-dependent deformation mechanisms and the role of twin boundaries in face-centered cubic Fe-Mn-C TWIP steel micro-pillars"
      Won Seok Choi,  4th International Conference on Medium and High Manganese Steel, RWTH Aachen University, Aachen​

42. 2019.03.12, "Effects of Cr and Al Additions on the Microstructure and Mechanical Properties of Co-Ti-W Based Alloys"
      Boryung Yoo, TMS 2019 Annual Meeting & Exhibition, Henry B. Gonzalez Convention Center, San Antonio

41. 2019.03.12, "Role of alloying elements on the phase stability and soft magnetic properties of AlFeCoCrMn high entropy alloys"
      Chanwon Jung, TMS 2019 Annual Meeting & Exhibition, Henry B. Gonzalez Convention Center, San Antonio

40. 2019.03.12, "Orientation-dependent Deformation Mechanisms and Twin Boundary-associated Strengthening in Fe-Mn-C TWIP steel Micro-pillar"
      Won Seok Choi, TMS 2019 Annual Meeting & Exhibition, Henry B. Gonzalez Convention Center, San Antonio

39. 2019.03.12, "Elemental partitioning & site-occupancy behavior of alloying elements in γ/γ′-strengthened Co-Ti based alloys"
      Pyuck-Pa Choi, TMS 2019 Annual Meeting & Exhibition, Henry B. Gonzalez Convention Center, San Antonio

38. 2019.01.24, "Advanced Characterization of Nanostructured Materials"
      Pyuck-Pa Choi, City U - Korea MSE Joint Workshop, City University of hong kong, Hong Kong
 

2018
37. 2018.10.26, "Design of BCC / B2 dual-phase refractory multi-principle element alloys"
      Hosun Jun, The 2nd International Conference on High-Entropy Materials, Ramada Plaza Hotel, 제주
36. 2018.10.26, "Effects of phase formation and composition on soft magnetic properties of AlFeCoCrMn high entropy alloys"
      Chanwon Jung, The 2nd International Conference on High-Entropy Materials, Ramada Plaza Hotel, 제주
35. 2018.12.10, "Correlative Characterization of High Entropy Alloys"
      Pyuck-Pa Choi, The 2nd International Conference on High-Entropy Materials, Ramada Plaza Hotel, 제주
34. 2018.10.26, "Three-dimensional Atomic Distribution Analysis of Metal Oxide Nanoparticles Using Atom Probe Tomograph"
      Kyuseon Jang, 대한금속재료학회, 대전컨벤션센터, 대전​
33. 2018.10.26, "Rapid Alloy Screening of Co- and Ti-based Alloy Using Metal 3D Printing Method"
      Gwanghyo Choi, 대한금속재료학회, 대전컨벤션센터, 대전
32. 2018.10.26, "A Study on Microstructure and Magnetic Properties of AlFeCoCrMn High Entropy Alloys Combined with DFT Calculation"
      Chanwon Jung, 대한금속재료학회, 대전컨벤션센터, 대전
 
31. 2018.10.25, "Study on Laser Cladding of CoNiCrAlY Bond Coat on Co-Ti-W Alloy"
      JaeWook Han, 대한금속재료학회, 대전컨벤션센터, 대전
 
30. 2018.10.24, "Microstructural Changes and Elemental Partitioning Behaviors of Co-based Superalloys with Alloying Elements"
      Boryung Yoo, 대한금속재료학회, 대전컨벤션센터, 대전
29. 2018.10.24, "Deformation mechanisms and twin boundary-associated strengthening in TWIP steel micro-pillar"
      Won Seok Choi, 대한금속재료학회, 대전컨벤션센터, 대전
  
28. 2018.10.24, "The effects of alloying elements on microstructures and mechanical properties of γ/γ′-strengthened Co-Ti-based alloys"
      Hye-Ji Im, 대한금속재료학회, 대전컨벤션센터, 대전
27. 2018.10.24, "Three-dimensional Atomic-scale Insights Into Engineering Alloys Using Atom Probe Tomography"
      Pyuck-Pa Choi, 대한금속재료학회, 대전컨벤션센터, 대전

26. 2018.08.30, "Characterization of metallic nanoparticles using Atom Probe Tomography"

     Pyuck-Pa Choi, 2018 제3회 APT 워크샵, KIST, 서울 

 
25. 2018.06.25, "Investigation of elemental distributions for Al0.1(Fe1+xCoCr1-xMn)0.9 (x=0, 0.2, 0.4, 0.6) high entropy alloys for soft magnetic materials"
      Chanwon Jung, 2018 Joint Symposium on Materials Science and Engineering for 21st Century, USTB, Beijing(China)

24. 2018.06.14, "Elemental partitioning and site occupation of Mo and Cr in Co-Ti based superalloys "
      Hye-Ji Im, Atom Probe Tomography and Microscopy 2018NIST, Gaithersburg(U.S. Maryland)

23. 2018.06.14, "
A New Method for Mapping the 3D Atomic Distribution within Nanoparticles by Atom Probe Tomography (APT)
"
      Se-Ho Kim, Atom Probe Tomography and Microscopy 2018NIST, Gaithersburg(U.S. Maryland)

22. 2018.04.27, "Al0.1(Fe1+xCoCr1-xMn)0.9 (x=0, 0.2, 0.4, 0.6, 0.8) 고엔트로피 합금의 미세구조 및 자성특성분석"
      Chanwon Jung, 대한금속재료학회, 제주국제컨벤션센터, 제주

21. 2018.04.26, "금속원소 첨가에 따른 코발트계 초내열합금의 미세구조 변화"
      Boryung Yoo, 대한금속재료학회, 제주국제컨벤션센터, 제주

20. 2018.04.26, "원자단위 분석기술을 이용한 내화원소 다원초합금 설계"
      Hosun Jun, 대한금속재료학회, 제주국제컨벤션센터, 제주

19. 2018.04.26, "Electro-codeposition of Pd nanoparticles for mapping the three-dimensional atomic distribution by atom probe tomography"
      Se-Ho Kim, 한국화학공학회, 창원컨벤션센터, 창원

18. 2018.04.25, "Elemental partitioning and site-occupancy behavior in gamma/gamma' - strengthened Co-Ti based superalloy "
      Hye-Ji Im, 대한금속재료학회, 제주국제컨벤션센터, 제주



2017
17. 2017.11.07, "Investigation of various microstructure for Alx(FeCoCrMn)1-x high entropy alloys"
      Chanwon Jung, The 3rd East-Asia Microscopy Conference, BEXCO, 부산

16. 2017.11.07, "Microstructural changes of Co-based superalloys with alloying elements"
      Boryung Yoo, The 3rd East-Asia Microscopy Conference, BEXCO, 부산

15. 2017.11.07, "Characterization of metallic nanoparticles using Atom Probe Tomography"
      Hosun Jun, The 3rd East-Asia Microscopy Conference, BEXCO, 부산

14. 2017.11.07, "Characterization of metallic nanoparticles using Atom Probe Tomography"
      Pyuck-Pa Choi, The 3rd East-Asia Microscopy Conference, BEXCO, 부산

13. 2017.06.26, "Enhanced Congo Red Dye Removal from Aqueous Solutions Using Iron Nanoparticles: Adsorption, Kinetics, and Equilibrium Studies"
      Se-Ho Kim, 2017 Joint Symposium MSE, KAIST, 대전 

12. 2017.05.15, "Compositional gradients and impurity distributions in thin-film solar cells studied by Atom Probe Tomography"
      Se-Ho Kim, 한국신재생에너지학회, 메종글라드 제주, 제주 

11. 2017.04.26, "Enhanced Congo Red Dye Removal from Aqueous Solutions Using Iron Nanoparticles: Adsorption, Kinetics, and Equilibrium Studies"
      Se-Ho Kim, 대한금속재료학회, 창원컨벤션센터, 창원

10. 2017.04.26, "첨가원소 및 열처리 조건에 따른 Co계 초합금의 미세구조 변화"
      Hye-Ji Im, 대한금속재료학회, 창원컨벤션센터, 창원



2016
9. 2016.10.26, “Atom Probe Tomography of superalloys”
    Pyuck-Pa Choi, 대한금속재료학회, BEXCO, 부산

8. 2016.10.16, “Atomic-scale insights into advanced materials given by Atom Probe Tomography & correlative microscopy”
    Pyuck-Pa Choi, 7th International Symposium on Practical Surface Analysis (PSA-16), ICC Hotel, 대전

7. 2016.10.12, “Atom Probe Tomography & correlative microscopy of advanced materials”
    Pyuck-Pa Choi, Atom Probe Tomography workshop 초청강연, KIST, 서울

6. 2016.09.23, “Characterization of Co-based superalloys using Atom Probe Tomography”
    Pyuck-Pa Choi, 첨단구조재료 심포지엄, POSTECH, 포항

5. 2016.08.11, “Correlative high-resolution characterization for understanding advanced materials”
    Pyuck-Pa Choi, 나노종합기술원 (NNFC) 세미나 초청강연, NNFC, 대전
 
4. 2016.07.14, “Atom Probe Tomography & correlative microscopy for understanding and designing steels”
    Pyuck-Pa Choi, 대한금속재료학회 하계기술강좌 초청강연, RIST, 포항

3. 2016.05.02, “Atomic scale insights into engineering alloys given by Atom Probe Tomography”
    Pyuck-Pa Choi, KAIST-NTU Joint Workshop 강연, MSE department, KAIST 대전

2. 2016.04.29, “Atomic scale insights into engineering alloys given by Atom Probe Tomography”
    Pyuck-Pa Choi, 대한금속재료학회 초청강연, 경주화백컨벤션센터, 경주

1. 2016.03.15, “Correlative high-resolution characterization for understanding and knowledge-based design of advanced materials”
    Pyuck-Pa Choi, MSE department, KAIST 대전
상단으로

Department of Materials Science and Engineering, KAIST
291 Daehak-ro, Yuseong-gu, Daejeon 305-701 Republic of Korea

TEL : +82-42-350-3321 (Office), +82-42-350-3361 (Lab)
Location : W1 Applied Engineering Building #2432

Copyright © All rights reserved. NMAC Laboratory

모바일 버전으로 보기